{"title":"Forge Motorsports","description":"","products":[{"product_id":"turbo-inlet-adaptor-for-i30n-sedann-konan","title":"Turbo Inlet Adaptor for i30N, Sedan N and Kona N","description":"\u003cp\u003e\u003cstrong\u003eTHIS WILL ONLY FIT 4\" INTAKES - THIS WILL \u003cu\u003eNOT\u003c\/u\u003e FIT THE STOCK AIRBOX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned and developed by Forge's highly skilled team on the Solidworks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. With one of the weak links on the i30N intake system being the restrictive aluminium inlet pipe, something more was needed on stage 1 and 2 tuned vehicles. You can not go wrong with Forge hardware on your tuned Hyundai - the results speak for themselves!\u003c\/p\u003e\n\u003cp\u003eMated to the Forge 4\" intake and high performance filter the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.\u003c\/p\u003e\n\u003cp\u003eThe turbo inlet adaptor improves your i30N or airflow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. This can have a positive affect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the intake system.\u003c\/p\u003e\n\u003cp\u003eThe Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than \u003cstrong\u003e150%\u003c\/strong\u003e over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard.\u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Black \/ i30N Facelift\/Sedan N\/Kona N","offer_id":34787105833116,"sku":"FMTIA10-RH-BK","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Black \/ i30N Pre Facelift","offer_id":43067165671663,"sku":"FMTIA2-BK","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Red \/ i30N Facelift\/Sedan N\/Kona N","offer_id":34787105865884,"sku":"FMTIA10-RH-RD","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Red \/ i30N Pre Facelift","offer_id":43067165704431,"sku":"FMTIA2-RD","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Blue \/ i30N Facelift\/Sedan N\/Kona N","offer_id":34787105898652,"sku":"FMTIA10-RH-BL","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Blue \/ i30N Pre Facelift","offer_id":43067165737199,"sku":"FMTIA2-BL","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Performance Blue \/ i30N Facelift\/Sedan N\/Kona N","offer_id":41204782923932,"sku":"FMTIA10-RH-PBLU","price":330.0,"currency_code":"AUD","in_stock":true},{"title":"Performance Blue \/ i30N Pre Facelift","offer_id":43067165769967,"sku":"FMTIA2-PBLU","price":330.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/products\/FMTIA2-Assembled_Left_WEB.jpg?v=1630040534"},{"product_id":"induction-kit-i30n","title":"Hyundai i30N Induction Kit","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note we have been seeing extended wait times on these intakes due to their popularity.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis aftermarket cold air intake system improves your i30N's airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai's 2.0 four pot engine.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSupplied with a Pipercross multi-layer foam construction filter these intakes provide up to 60% more air than the stock filter.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe intake is finished off with Forge's unique black thermal powder coating.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis kit comes with Forge's usual detailed fitting guide to help make installation as easy as possible.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInterestingly there has been lots of divided opinions about the intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken. During this testing, Forge did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.\u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Black","offer_id":34787106390172,"sku":"FMINDK28-BK","price":900.0,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":34787106422940,"sku":"FMINDK28-BL","price":900.0,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":34787106455708,"sku":"FMINDK28-RD","price":900.0,"currency_code":"AUD","in_stock":true},{"title":"Performance Blue","offer_id":40584673689756,"sku":"FMINDK28-PBLUE","price":900.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/products\/Induction_Kit_for_Hyundai_i30N_66613jpeg.jpg?v=1630040502"},{"product_id":"cherrytuning-short-and-side-shifter-i30n","title":"Hyundai i30N Short and Side Shifter","description":"\u003cp\u003eThis short\/quick shifter set has been developed by Forge to offer a short, crisp, and precise gear changing experience.\u003c\/p\u003e\n\u003cp\u003eDesigned with black stealth OEM styling and simple adjustability to suit the individuals driving needs.\u003c\/p\u003e\n\u003cp\u003eThe horizontal and vertical travel between gears can be set to standard or reduced by any amount up to approximately 50%\u003c\/p\u003e\n\u003cp\u003eCheck out the installation video below for a better idea of how this part works.\u003c\/p\u003e\n\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/etrJbMyjiFc\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Forge Motorsports","offers":[{"title":"Default Title","offer_id":34787106488476,"sku":"FMSS3","price":269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/products\/Hyundai_I30n_Short_and_Side_Shifter_87915.jpg?v=1630040510"},{"product_id":"cherrytuning-uprated-intercooler-i30n","title":"Hyundai i30N Pre-Facelift Intercooler","description":"\u003cp dir=\"ltr\"\u003eThe Forge Motorsport front mount uprated intercooler for the Hyundai i30N.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003ci\u003eNote: While the core is likely to fit the PD SR and N-Line models, the pipework will not as the N turbo is rotated in a different direction to the G4FJ turbo. Customers are able to purchase this kit for use on a non-N model, however we aren't able to supply the core separately from the pipework.\u003c\/i\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description - Notes from the Manufacturer\u003c\/h3\u003e\n\u003cp\u003eThe Forge Motorsport front mount uprated intercooler for the Hyundai i30N.\u003cbr\u003e\u003cbr\u003eIf you use a i30N for fast road or have a high performance tune in a hot climate, this product is essential. Utilising our industry leading bar and plate design alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics - CFD) to develop our high flow cast end tanks, the turbo side end-tanks feature an internal divider to ensure the full volume of the stepped core is utilised. \u003cbr\u003e\u003cbr\u003eThe bar and plate core has over 129% more volume and an increase of frontal surface area over 71% (over the stock cooler) meaning the Forge Motorsport intercooler is the largest currently available on the market. To ensure we deliver optimum cooling efficiency, the development team created a fabricated ducting system that has been skilfully integrated into the superior design of this product.\u003cbr\u003e\u003cbr\u003eThe inlet and outlet sizes have been increased in diameter to 65mm, giving an increase of 27% more volume over the stock cooler to give perfect flow. The development team also added a custom hard pipe increasing the diameter by 14 mm to 64mm - up from the factory 50mm. This replaces the stock factory pipe on the hot side to ensure this package gives you all you need for maximum performance gains on high levels of tune.\u003cbr\u003e\u003cbr\u003eThe boost pipe and intercooler come in our standard black textured finish powder coat for maximum longevity.\u003cbr\u003e\u003cbr\u003eDuring our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C), we then did a dyno pull from this point, in doing this it gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.\u003cbr\u003e\u003cbr\u003eAfter more than six pulls on the dyno we still had super safe IATs and the Forge Motorsport intercooler gave results of 24°C, halving the factory’s intercooler intake temps from 48°C. These tests took place in relatively cold conditions with an ambient dyno cell temperature of 15°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear.\u003cbr\u003e\u003cbr\u003eThis intercooler combined with our intake, and a quality aftermarket cat back exhaust will deliver you unparalleled levels of performance. The final testing results were very notable - not only did the Forge Motorsport intercooler halve the IATS, it also significantly increased both power and torque over Hyundai’s claimed figures of 275bhp and 278lb.ft of torque, making an extremely impressive 307bhp and 347lb.ft.\u003cbr\u003e\u003cbr\u003eThe Forge Motorsport front mount intercooler has all the necessary hardware to install the kit in approximately 2.5 hours depending on competency and tools available.\u003cbr\u003e\u003cbr\u003eInstallation Guide: \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/?download_id=510\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eFMINT15 Fitting Instructions i30N Only\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Default Title","offer_id":34787106947228,"sku":"FMINT15","price":1700.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/products\/Uprated_Intercooler_for_Hyundai_i30n_41005.jpg?v=1630040511"},{"product_id":"forge-oil-catch-for-hyundai-i20n","title":"Oil Catch for Hyundai i20N","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e0.4L capacity*\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBespoke fitting kit for Hyundai i20N\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA drain tap for ease of emptying\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA dipstick for simple level inspection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eForge oil catch can solution which is a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003ebespoke design\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003efor the Hyundai i20N. It has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture. All of which would ordinarily make their way back through to the inlet of the engine.\u003cbr\u003e\u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Default Title","offer_id":43926861512943,"sku":"FMCT10","price":580.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/files\/Oil_Catch_Tank_for_Hyundai_i20N_46533jpeg.jpg?v=1684703144"},{"product_id":"turbo-muffler-delete-for-hyundai-i20n","title":"Hyundai 1.6T SS Intercooler Resonator (Turbo Muffler) Delete","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This is a new product, local stock is not currently available as we are waiting on the first batch from Forge.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis \"turbo muffler delete\" kit for the Hyundai I20N replaces the original restrictive compressor outlet with a smooth and turbulence free solution. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe OEM part is located on the outlet of the turbo compressor and its only function is to eliminate as much of the engines acoustics as possible. Where it does a good job of quietening down the audible sounds from the turbo it also disrupts the airflow in an area where it’s not needed. \u003c\/p\u003e\n\u003cp\u003eWith Forge Motorsports expertise in this area, they have developed a kit which has removed this baffled chamber in favour with our CNC machined billet adaptor which now creates a smooth transition and uninterrupted air flow track to the intercooler, this aids to increase airflow to the engine adding extra performance especially on tuned vehicles. \u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Red","offer_id":43947628462319,"sku":"FMMD7-RD","price":300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/files\/Muffler_Delete_for_Hyundai_I20N_50527jpeg.jpg?v=1684703144"},{"product_id":"forge-motorsport-boost-pipes","title":"Uprated Cold-Side Charge Pipe","description":"\u003cp\u003e\u003cstrong\u003eThis will NOT work with the OEM intercooler. This product will only work with aftermarket intercoolers with an outlet size of 63-67mm (Cold Side).\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplied with a durable black powder coated finish\u003c\/li\u003e\n\u003cli\u003eMinimal airflow disruption\u003c\/li\u003e\n\u003cli\u003eIncreased diameter giving increased flow compared to OEM\u003c\/li\u003e\n\u003cli\u003eMandrel bent single piece aluminium pipework\u003c\/li\u003e\n\u003cli\u003eCNC machined billet couplers\u003c\/li\u003e\n\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter already developing many performance upgrades for the Hyundai I30N \u0026amp; Veloster N, the Forge Motorsport engineers have found another area for improvement on the Hyundai’s hot hatch. This time it is the boost pipe which runs from the outlet of the intercooler, to the throttle body (cold side).\u003cbr\u003e\u003cbr\u003eWhen looking at the OE hard pipe it was clear to see there was room for improvement. The bore diameter has been increased by 20%, which in testing resulted in a faster spool up and a crisper power delivery. A 66mm internal diameter mandrel bent alloy hard pipe to compliment the transition of smooth air from the cold side of the intercooler, which also matched the size of the OEM throttle body perfectly. Accompanied with fluro lined high quality silicone joiners, this upgrade is the perfect addition to any highly tuned engine.\u003cbr\u003e\u003cbr\u003eThese will fit Hyundai Kona N, Sedan N, FL I30N hatch and Pre-Facelift I30N hatch; please select your model from the drop down menu.\u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Kona N \/ Sedan N \/ Facelift Hatch","offer_id":43938447098095,"sku":"FMBP7","price":630.0,"currency_code":"AUD","in_stock":true},{"title":"Pre-Facelift Hatch","offer_id":43938447130863,"sku":"FMBP4","price":600.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/files\/Boost_Pipe_for_the_Hyundai_i30N_Kona_N_and_Veloster_N_Facelift_13356jpeg.jpg?v=1684273397"},{"product_id":"gr-short-shift-kit","title":"Toyota GR Short Shift Kit","description":"\u003cp\u003eForge Motorsport Short Shift Kit to suit GR Yaris \u0026amp; Corolla. \u003c\/p\u003e\n\u003cp\u003eThe Toyota Yaris GR and Corolla GR are both fabulous sporty hot hatches but there are still areas that can be improved upon. The gear shift is just one of those areas, the feel of the shift has a sporty feel however it is let down by the amount of travel in the gear stick. This short\/quick shifter set has been developed by Forge to offer a crisp, short, and precise gear changing experience.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Forge Motorsports","offers":[{"title":"Default Title","offer_id":44370704204015,"sku":"FMSS5","price":240.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/files\/Short_Shifter_for_Toyota_Yaris_GR_98205jpeg.jpg?v=1704933972"},{"product_id":"gr-turbo-inlet","title":"Toyota GR Turbo Inlet","description":"\u003cp\u003eForge Motorsport Turbo Inlet Adaptor to suit GR Yaris \u0026amp; Corolla. \u003c\/p\u003e\n\u003cp\u003eThe turbo inlet adaptor and high flow inlet pipe has a capacity of more than \u003cstrong\u003e53%\u003c\/strong\u003e over the stock item. Not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. \u003c\/p\u003e\n\u003cp\u003eA commonly asked question is will this fit with an aftermarket intake? the answer is yes it will fit other manufacturers intakes and fits to the original airbox.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured from\u003cstrong\u003e 6082\u003c\/strong\u003e aerospace grade aluminium.\u003c\/li\u003e\n\u003cli\u003eCNC machined turbo adaptor, hose joiner’s and pipe bracket\u003c\/li\u003e\n\u003cli\u003eBlack anodised for ultimate protection and durability.\u003c\/li\u003e\n\u003cli\u003eIncreased capacity\u003c\/li\u003e\n\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\n\u003cli\u003eIncreased air flow\u003c\/li\u003e\n\u003cli\u003eThese hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forge Motorsports","offers":[{"title":"Default Title","offer_id":44370711412975,"sku":"FMTIA8","price":730.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0695\/1836\/files\/Turbo_Inlet_Adaptor_for_Toyota_Yaris_GR_61611jpeg.jpg?v=1704933972"}],"url":"https:\/\/cherrytuning.us\/collections\/forge-motorsports.oembed","provider":"Cherry Tuning \u0026 Performance","version":"1.0","type":"link"}